ProTek Servos & Accessories

ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Long) (25T)

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 25mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek)

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features...

ProTek RC Aluminum Clamping Servo Horn (Black) (25T)

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T)

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 370TBL "Black Label" Waterproof High Torque Brushless Crawler Servo (High Voltage)

Torque 650 oz in Speed 0.13 sec at 7.4VThe ProTek 370TBL was developed specifically for crawler applications. Heavy 2.2 class rigs, U4 racers, lightweight 1.9 comp builds, and ultra detailed scalers can all benefit from the feature set that the 370TBL...

ProTek RC 170TBL Black Label High Torque Brushless Servo (High Voltage)

Torque 650 oz in Speed 0.11 sec at 7.4VBrushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency...

ProTek RC 170SBL Black Label High Speed Brushless Servo (High Voltage)

Torque 535 oz in Speed 0.08 sec at 7.4VProTek RC 170SBL Black Label High Speed Brushless Servo (High Voltage). Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can...

ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo (High Voltage/Metal Case)

Torque 290 oz in Speed 0.06 sec at 7.4V Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior...

ProTek RC160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case

Torque 274 oz in Speed 0.06 sec at 7.4VThis is the ProTek R/C 160T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at...

ProTek RC 160SS Low Profile Super Speed Metal Gear Servo High Voltage/Metal Case

Torque 274 oz in Speed 0.06 sec at 7.4VThis is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at...

ProTek RC 155T Digital "High Torque" Metal Gear Servo (High Voltage/Metal Case)

Torque 453 oz in Speed 0.08 sec at 7.4VThis is the ProTek R/C 155T Digital Hi-Speed Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With...

ProTek RC 155S Digital "High Speed" Metal Gear Servo (High Voltage/Metal Case)

Torque 370 oz in Speed 0.06 sec at 7.4VThis is the ProTek R/C 155S Digital Hi-Speed Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With...

ProTek RC140T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case

Torque 274 oz in Speed 0.06 sec at 7.4VThis is the ProTek R/C 140T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at...